ACCESSORIES - ACCESOIRES

POWER LINK

 

POWER LINK

Remote Control Extension System
Extenseur Universel de télécommandes
NEW "11MHz" REMOTE CONTROL EXTENSION SYSTEM with VERY LOW ATTENUATION in the existent cables, taps and tv-sockets no additional cable between tv-sets) and VERY EASY TO INSTALL (just plug it in tv-sockets).
It allows using the domestic audiovisual sets (VCRs, satellite & CATV receivers, HIFI etc), from any tv-set in the house.
Ideal for the analog & digital satellite & CATV reception for all the house.
Several POWER-LINK can act simultaneously from and to different locations.

SPECIFICATIONS

IR Receiver IR Reemitter
Existent Signal (TV/FM):
 Gain (VHF/UHF) -0.5 dB
Control Signal:
 Input I.R. 35-41 KHz
 Modulation 11 MHz ASK
 Inj. Level 110 dBuV
 Regulation -20 dB
Existent Signal (TV/FM):
  Gain (VHF/UHF) -0.5 dB
Control Signal:
  Demodulation 11 MHz ASK
  Minimum level <50dBuV
  Output 37 +/- 1 KHz

POWERMID XL LONG RANGE

Use your existing remote to control your TV, VCR, stereo, satellite and cable box from anywhere in your home, even lying in bed.
POWERMID XL LOG RANGE

AV SHARE

 

 

AV-SHARE

2.4 GHz Wireless Video Sender
Video-transmetteur sans câbles 2.4GHz
Transmitter of audiovisual and control signals without any wires.
Ideal for controlling and distributing the signals from any audio-visual equipment (analog and DIGITAL satellite, TV, VCR, CATV, HIFI, camcorder, etc...), up to any tv-set in the home without any additional cable or antenna installation.
High picture quality and stereo sound without interferences (Directional antenna and 4 channel in 2,4GHz band).
Long reach through walls, ceilings and obstacles of the building (up to 100m in open space).

SPECIFICATIONS

Transmitter Receiver
Output level 90 dBuv (3m)
Freq. band 2.4-2.4835 GHz
Modulation FM (Video & Audio)
Video input level 1 Vpp - 75ohm
Audio input level 1 Vpp - 600ohm
Power consumption 12 VDC - 350 mA
Output Level 1 Vpp (video)
1 Vpp (audio)
Noise Figure 3.5 dB
Power consumtion 12 VDC - 350 mA
Remote Control Tx Freq. 433.92 MHz

DIGI SENDER

PLL STEREO Modulator for DIGITAL TV
Modulateur PLL STEREO pour la TV-Numerique
The perfect solution for ditributing satellite-tv to all tv sets of the housing (compatible with all digital receivers).Also suitable for the home distribution of any audiovisual equipment (VCR,satellite receiver, CATV, HIFI, Video Camera, etc).
Very easy insertion in the existent antenna installation witn very low attenuation (VHF or UHF PLL modulator with L+R STEREO system). Can be connected with other DIGISENDER connected to other audiovisual equipment so as to distribute them to all the tv-sets in the home.

DIGI SENDER

SPECIFICATIONS

Modulator Type PLL-PAL B/G
STEREO (L+R)
Channels (cod.7195) S3-S10, E5-E12
Channels (cod.7196) E21-E69
Output level 75 dBuV
Test signal Conmutable
Video input 1 Vpp - 75 ohm
Audio input 1.5V - 10Kohm
AV connectors RCA
RF though 40-860 MHz
RF Gain 5 dB
Power 220 Vac
Consumtion <5W

diseq.jpg (14583 bytes)

 

 

DISEQC

¡

SPECIFICATIONS

 
Output connector Euroscart connector
Baseband out Flat/Pal
Audio subc. freq. 5.00-10MHz
Audio De-emphasis 50uS-XPAND
Audio Freq. 50 Hz-15KHz +/- 3dB
Bandwidth 150/250 KHz
Modelator type PLL
Modulator Level 90 dBuV
Output channels S3 at aE12

MINISAT 5

MINISAT 5 - SMATC Receiver ( 5 Channels )

• Primary Power 220 VAC • De-emphasis CCIR 405-1-C625
• Input freq. 920-2050 MHz • Video out. Level 1 Vpp
• Memory 120 • Output Baseband Pal/Flat (int.)
• RF Channels 5 (50 with Timer) • IF Audio Bandwidth 5 to 10Mhz
• Input Signal level -65 dBm to -30 dBm • Audio de-emphasis 50/75 uS-J17/XPAND
• IF Bandwidth 27 MHz • Level output audio 0 dBm/600 Ohms
• LNB power 12 VDC (x5) • 1 Scart
• Modulator type PLL-DSB • Output Level 73 +/- 3 dBuV


 

 

email: ortiz@engelsat.com